Carriers

Technical Data — M Series
Type MC 1250
Divider systems
for stay variant “RM“
Divider system TS 0
without height subdivision
The divider system can be planned by you or by our engineers on the
basis of the information you supply about the configuration of the
cable carrier.
As standard, the divider system is fitted on every frame stay!
(with stay assembly on every 2nd chain link)
s T = 5 mm
a T min = 10 mm
a x min = 20 mm
69
69
Please state the number of
dividers/cross section n T when ordering.
s T
Sample order:
Divider system TS 0/n T 3
a TL
a X
B i
a TR
The dividers can slide along the chain cross section!
Divider system TS 5
Hole stay – split design
B
Calculation of Bi
B i = Σ n p B p - 3 mm
n p = Number of hole stay inserts
B p = Width of hole stay inserts
D
69
96
99.5
KR
Calculation of chain width:
B k = B i + 45 mm
Calculation of chain width over
universal connector:
B EF = B i + 51 mm
Please state the hole diameter and position
(from left to right) when placing your
order.
Sample order: Divider System TS 5
B 1 = 50 mm, B 2 = 30 mm, B 3 = 25 mm,
B 4 = 45 mm
If possible please enclose a sketch.
Size Width
D
B
10 15
15 20
20 25
25 30
30 35
40 45
50 55
55 60
(B i )
B k
B EF
Glide shoes can be attached
for long travel lengths
KR min = 180 mm
22.5
D
B
The hole stay inserts can be combined according to preference.
The cables and hoses must be able to move freely in the cable carrier.
In order to calculate the required free space the following values apply:
for round cables:
10 % of the cable diameter
for hoses:
20 % of the hose diameter
3.434 Subject to technical changes! MC