Carriers

Technical Data — M Series
Type ME 0320
Divider system
The divider system can be planned by
you or by our engineers on the basis of
the information you supply about the configuration
of the cable carrier.
As standard, the divider system is fitted
on every 2nd chain cross section!
Divider system TS 0
without height subdivision
Version A Version B
s T 2 mm 2 mm
a T min 3 mm 4.5 mm
a x min 6 mm 8 mm
With Version B a x must be divisible by 4!
Please state the number of dividers/cross
section n T when ordering.
Sample order:
Divider system TS 0 – A/n T 4
Version A (Standard)
The divider, without a
stopping cam,
can be moved along
the chain cross-section!
A combination of the divider Versions A and B ist possible!
a TL a x1
a x2 a TR
B i
19
Version B
With a stopping cam
the divider is
fixed in the chain
cross-section
(a x -grid 4 mm)
The dividers can be moved in the chain cross-section (Version A) and/or are
fixed (Version B). With divider version B please state the fitting distances
a T and ax !
s T
KR
Divider system TS 1
with continuous height subdivision
Height subdivision: Al-Profile 9 x 2 mm
Version A Version B
s T 2 mm 2 mm
a T min 3 mm 4.5 mm
a T max 20 mm 20.5 mm
a x min 6 mm 8 mm
n T min 2 2
With Version B a x must be divisible by 4!
Please state the type of height
subdivisions and the number of
dividers/cross section when ordering.
Sample order:
Divider system TS 1-A – VD 2/n T 5
Divider system TS 2
with grid subdivision
Height subdivision: Al-Profile 11 x 4 mm
Version A Version B
s T 2 mm 2 mm
a T min 3 mm 4.5 mm
a x min 20 mm 20 mm
with subdivision
a x min 6 mm 8 mm
at VR 0
With Version B a x must be divisible by 4!
Please indicate the cavities (from left
to right), the relevant subdivision variant
and the assembly spacing a T and a x
when ordering.
VD 1 VD 2 VD 3 VD 23
The dividers can be moved in the chain cross-section (Version A) and/or are
fixed (Version B). With divider version B please state the fitting distances
a T and ax !
Dividers fixed by height subdivision profiles, the grid segments can slide along
the cross-section (Version A) or are fixed (Version B)!
Sample order:
Divider system TS 2-B
K(cavity) 1-VR 0 / 8.5 mm
K 2-VR 3 / 40 mm
K 3-VR 0 / 8 mm
K 4-VR 23 / 44 mm
3.504 Subject to technical changes! ME
8.5
8.5
3.5
13.5
B i
13.5
3.5
3.5
8
3.5
s T
a TL a x1 a x2 a TR
Technically recommended variant: VD 1
VR 0
7.5
2
1
3
s T
4
Position of the
a TL a x1 a x2 a TR sub-division(s)
in the divider
Bi
19
VR 1
7.5
VR 0
VR 2 VR 3
2.5
12.5
12.5
2.5
VR 23
VR 0 VR 0
Technically recommended variants: VR 0 and VR 1
2.5
6
2.5
KR
KR
2
1
3
Position of the
sub-division(s)
in the divider
10
10