Carriers

System Components
Guide Channels
Guide channels are crucial elements as far as the operational safety of
plastic cable carriers with long travel lengths are concerned.
The upper run of the cable carrier sags down and glides on its lower part
and / or on a gliding surface of the guide channel.
Designs
Guide Channels in steel plate design
These can be suppplied in galvanised steel plate or high-grade steel. The
choice of material depends on the application conditions and your
requirements. The standard delivery length is 2m.
On request we can produce components of any desired length up to 3m.
Special lengths in excess of 3m also present no problem to us.
Please consult us for more details.
Guide Channel Modular System made of Aluminium profiles
• Simple assembly
• No intersection bolting, but simple alignment by way of a double compression
joint with plastic clamping profiles.
• Available on request with a continuous base-tray.
• Easy handling
• Low intrinsic weight
• One-piece channel side walls
• Channel side wall profiles with support, with inclined slants on both
sides
Further information on 2D and 3D CAD Data can be found on the
internet at www.kabelschlepp.de.
Pull-out page
We reserve the right to make technical changes! 6.03