Carriers

Technical Data — M Series
Type MT 0475
Divider systems
for stay variant “RMD“
for opening variants 01 and 02
Divider system TS 0
without height subdivision
The illustration shows opening variant 02
s T = 2.8 mm
a T min = 6 mm
a x min = 8 mm
Please state the number of dividers/cross
section n T when ordering.
Sample order:
Divider system TS 0 / n T 4
The divider system can be planned by you or by our engineers on the
basis of the information you supply about the configuration of the
cable carrier.
As standard, the divider system is fitted on every 2nd chain cross
section!
26
a TL a x1 s T
a TR
B i
The dividers are fixed in the chain cross-section! (8 mm sections)
Please state the fitting intervals a T and a x !
KR
Divider system TS 1
without continous height subdivision
Height subdivision: Al-Profile 6 x 2.4 mm
The illustration shows opening variant 02
s T = 2.8 mm
a T min = 6 mm
a T max = 20 mm
a x min = 8 mm
n T min* = 2
Please state the type of height
subdivisions and the number of
dividers/cross section n T when ordering.
Sample order:
Divider system TS 1 - VD 1 / n T 4
VD 1 VD 2 VD 3 VD 23
12.8
5.3
20.3
5.3
a TL a x1 a x2 a TR
subdivision(s)
2
1
3
s T
Position of the
B i
in the divider
10.8
18.3
12.6
3.3
Technically recommended variants: VD 1
The dividers are fixed in the chain cross-section! (8 mm sections)
Please state the fitting intervals a T and a x !
KR
15
3.706 Subject to technical changes! MT