Carriers

Technical Data — M Series
Type MC 0950
Divider systems
for Stay variant “RV“
The divider system can be planned by you or by our engineers on the
basis of the information you supply about the configuration of the
cable carrier.
As standard, the divider system is fitted on every frame stay!
(with stay assembly on every 2nd chain link)
Divider system TS 0
without height subdivision
The dividers can slide along the chain cross section!
s T = 4 mm
a T min = 4.5 mm
a x min = 14 mm
n Tmin = 2 mm
58
Please state the number of
dividers/cross section n T when ordering.
Sample order:
Divider system TS 0/n T 3
a TL
a x
s T
a TR
KR
B i
Divider system TS 1
with continuous height subdivision
Height subdivision: Al-Profile 11 x 4 mm
Technically recommended variants: VD 1, VD 2 and VD 3
The dividers can slide along the chain cross section!
VD 1
VD 3 VD 5
VD 45
VD 2 VD 4
VD 23
VD 415
VD 25 VD 43
4
2
1
3
5
a TL a
a x
sT TR Position of the
sub-division(s)
B i
in the divider
27
27
34.5 19.5
34.5
19.5
42 12
42
12
19.5
11
19.5
12
26
12
12
11
11
12
12 18.5 19.5
12
18.5
19.5
KR
15
30
s T = 4 mm
a T min = 4.5 mm
a T max = 25 mm
a x min = 14 mm
n T min = 2
Please state the type of height subdivision and the number of
dividers/cross section n T when ordering.
Sample order:
Divider system TS 1– VD 131/n T 7
3.418 Subject to technical changes! MC