Carriers

Technical Data — M Series
Type MT 1250
Chain cross section
in accordance with section in schematic
illustration
Bi from 103 - 359 mm in sections of 16 mm
Stay variant “RDD“
Frame stay – Plastic cover system
Protective covers on the outside are
“hinged” to both sides
Protective covers on the inside can be
released by turning through 90°!
Calculation of chain width:
B k = B i + 45 mm
68.5
96
99.5
Calculation of chain width over
universal connector:
B EF = B i + 51 mm
B i
B k
22.5
KR
B EF
Glide shoes can be attached
for long travel lengths
Intrinsic chain weight
depending on chain width
Reference weight =
Intrinsic chain weight q k = 8.0 kg/m
(cf. load diagrams)
Calculation of the difference in the
additional load ∆q z
8.0 kg/m – 6.9 kg/m = 1.1 kg/m
The permitted additional load q z in
accordance with the load diagrams is
increased by 1.1 kg/m
17 chain widths are available
B i B k G k
mm mm kg/m
103 148 5.7
119 164 5.9
135 180 6.1
151 196 6.3
167 212 6.5
183 228 6.7
199 244 6.9
215 260 7.1
231 276 7.3
247 292 7.5
B i B k G k
mm mm kg/m
263 308 7.7
279 324 7.9
295 340 8.1
311 356 8.3
327 372 8.5
343 388 8.7
359 404 8.9
Glide shoes
For long travel lengths, gliding in a channel, interchangeable glide
shoes are used. These can be produced from different plastics
and guarantee optimum friction and wear ratios. For travel speeds
> 2.5 m/s highly wear-resistant plastic is used.
3.726 Subject to technical changes! MT