Carriers

Technical Data — M Series
Type MC 1250
Chain cross sections
in accordance with section in schematic
illustration
Stay variant RMA
The stay variant RMA serves to guide
particularly large cable diameters within
the cable carrier.
The mounting frame stay can be fitted
inside or outside in the bend radius
according to preference.
Profile bar material: Aluminium Alloy
Divider material: Plastic
The cable carrier must lie on the chain
bands and not on the stays.
Bi from 200 - 800 mm in sections of 1 mm
Fitting to the inside –
observe the minimum KR:
H i = 130 mm – KR min = 180 mm
H i = 160 mm – KR min = 180 mm
H i = 200 mm – KR min = 220 mm
B i 1min, B i 3min, = 40 mm
Fitting to the outside –
Consider the operating and installation
heights.
The cable carrier must lie on the chain
bands and not on the stays.
Because of the design and layout parameters which need
to be considered we would ask that you consult our technical
department.
72
96
99.5
Hi
15
KR
22.5
B i1 B i2 B i3
B i
B EF
B k
Glide shoes can be attached
for long travel lengths
KR min = 180 mm
MC Subject to technical changes! 3.435