Carriers

Technical Data — M Series
Type MC 1250
Divider systems
for Stay variant “RV“
Divider system TS 2
with grid subdivision (1 mm grid)
Height subdivision: Al-Profile 11 x 4 mm
Technically recommended variants: VR 0, VR 1, VR 2 and VR 3
Dividers fixed by height subdivision, the grids can slide along
the chain cross section!
VR 0
VR 23
VR 27
VR 45
VR 47
VR 437
VR 63
VR 65
VR 67
VR 615
VR 617
VR 17 VR 25 VR 43 VR 61 VR 0
72
26.5
11
26.5
26.5
26
11.5
19
26
19
19
33.5
11.5
11 18.5 19
11.5
11.5
26
26.5
11.5 11.5 11.5 11.5
33.5
19
41
11.5
18.5
11
19
a TL a x1 a x2
s T a TR
B i
s T = 6 mm
a T min = 8 mm
a x min = 20 mm (with height subdivision)
a x min = 16 mm (at VR 0)
n T min = 2
18.5
18.5
11.5
34
18.5
11.5
26.5
18.5
19
19
18.5
26.5
11.5
34 18.5
72
KR
6
4
2
1
3
5
7
15
30
45
Position of the subdivision(s)
in the divider
Please indicate the cavities (from left to right), the relevant subdivision
variant and the assembly spacing a T and a x when ordering.
Sample order: Divider system TS 2
K(cavity) 1 - VR 0 / 40 mm
K 2 - VR 1 / 98 mm
K 3 - VR 2 / 62 mm
Divider system TS 3
with height subdivision:
Plastic Partitions
Technically recommended variants: VR 0, VR 1, VR 2 and VR 3
Dividers fixed by height subdivision, the grids can slide along
the chain cross section!
VR 0
VR 1
VR 2
VR 4
VR 6
VR 8
VR 167
72
34
34
27
41
20
48
13
55
6
62
13 17 17 13
KR
8
6
4
2
1
3
5
7
9
14
28
42
56
a
a TL a x1 ax2
s T TR
B i
Twin divider
s T = 8 mm
a T min = 4 mm
a x min = 16 mm (with height subdivision)
a x grid = see a x -table
n T min = 2
The twin divider can be moved, suitable
for later assembly/fitting.
s T = 4 mm
ax
a x mm (Centre-to-centre distance of dividers)
16 18 23 28 32 33 38 43 48 58 64 68 78 80 88
96 112 128 144 160 176 192 208
When using partitions with a x > 112 mm, a twin divider should be
used to provide an additional central support.
4.0
Position of the subdivision(s)
in the divider
Assembly
of Twin Divider
Please indicate the cavities (from left to right),
the relevant subdivision variant and the assembly
spacing a T and a x when ordering.
Sample order: Divider system TS 3
K(cavity) 1 - VR 0 / 80 mm
K 2 - VR 1 / 38 mm
K 3 - VR 1 / 68 mm
with twin divider
MC Subject to technical changes! 3.431