Carriers

System Components
Explanation of Terms – Guide Channels
L S = Travel length of cable carrier
L KA = Channel length
L KA ’ = Channel length with support
( = ∧ L S /2) with one-sided arrangement
( = ∧ X - 2 l 1 ) with opposing arrangement
L Z1 = Additional measurement for loop overhang
( = ∧ Ü B + 50 mm) with standard connection
L Z1 ’ = Additional measurement for loop overhang
with lower driver connection and RKR*
L Z1 ” = Additional measurement for loop overhang
with lower driver connection and flexible deflection curve bending line *
L Z2 = Additional measurement for connection ( = ∧ l 1 + 50 mm)
X = Connection distance with an opposing arrangement
B KA = Total channel width
B EF = Maximum width of cable carrier
b 1 = Inner channel width
b 2 = Distance between boreholes – channel screwed on from the outside
b 3 = Distance between boreholes – channel screwed on from the inside
b 4 = Distance between boreholes – fixing of the cable carrier
b 5 = Width of (channel) floor plate
h KA = Channel height
h 1 = Channel profile height – operating height
h 2 = Channel profile height – support height
s 1 = Depth of side wall
s 2 = Depth of (channel) floor plate
d = Bore-Ø for screw
Technical Data of Cable Carrier:
l 1
Ü B
Ü B ’
= Connection length
= Loop overhang with standard connection
= Loop overhang with lower driver connection and RKR*
Ü B ” = Loop overhang
with lower driver connection and flexible deflection curve bending line*
H = Connection height with standard connection
H’ = Connection height with lower connection*
Recommendation: H’ = 3 h G
RKR = Reverse bend radius
*) Please allow us to plan and design installations of this
kind for you.
6.05