Carriers

Technical Data — M Series
Type MC 0320
Divider system
The divider system can be planned by you or by our engineers on the
basis of the information you supply about the configuration of the
cable carrier.
As standard, the divider system is fitted on every 2nd chain
cross-section.
Divider system TS 0
without height subdivision
s T = 2 mm
a T min = 3 mm
a x min = 6 mm
19
s T
KR
Please state the number of
dividers/cross section n T when ordering.
Sample order:
Divider system TS 0/n T 4
a TL a x a TR
B i
The dividers can slide along the chain cross section!
Divider system TS 1
with continuous height subdivision
Height subdivision: Al-Profile 9 x 2 mm
s T = 2 mm
a T min = 3 mm
a T max = 20 mm
a x min = 6 mm
n T = 2 mm
Please state the type of height
subdivision and the number of
dividers/cross section n T when ordering.
Sample order:
Divider system TS 1 – VD 1/n T 3
VD 1 VD 2 VD 3 VD 23
8.5
8.5
3.5
13.5
B i
3.5
3.5
a TL a x a TR
s T
Technically recommended variant: VD 1
The dividers can slide along the chain cross section!
13.5
3.5
8
KR
2
1
3
Position of the
sub-division(s)
in the divider
10
Divider system TS 2
VR 1
VR 2 VR 3
VR 23
with grid subdivision (1 mm grid)
Height subdivision: Al-Profile 11 x 4 mm
VR 0
VR 0
2.5
VR 0 VR 0
2.5
s T = 2 mm
a T min = 3 mm
a x min = 20 mm (with height subdivision)
a x min = 6 mm (at VR O)
Please indicate the cavities (from left
to right), the relevant subdivision variant
and the assembly spacing a T and a x
when ordering.
Sample order:
Divider system TS 2
K(cavity) 1 - VR 0 / 20 mm
K 2 - VR 1 / 50 mm
K 3 - VR 0 / 20 mm
K 4 - VR 0 / 20 mm
7.5
2
1
3
s T
4
Position of the
a TL a x1 a x2 a TR sub-division(s)
in the divider
Bi
19
7.5
12.5
Technically recommended variants: VR 0 and VR 1
12.5
2.5
Dividers fixed by height subdivision, the grids can slide along
the chain cross section!
6
2.5
KR
10
3.404 Subject to technical changes! MC