Carriers

Technical Data — K Series
Type KE 0900
Divider systems
Divider system TS 4
with continuous height subdivision
Height subdivision:
Plastic 27 x 8 mm
Design 2
25
Design 1
KR
25
a x
B i
s T
s T = 4 mm
a x min = 15 mm
Half-dividers can slide along the chain cross-section.
At least 2 half-dividers with clasp grips on both sides
(Design 1) should be fitted in the lower
chamber near to the chain band.
Please state the type of height
subdivisions and the number of
dividers/cross section when ordering.
Sample order:
Divider system TS 4
Please enclose a sketch
3.312 Subject to technical changes! KE