Carriers

System Components
Positioning of the Strain
Relief Devices
For cable carriers with stacked sliding upper and lower runs the total
height of the strain relief device must not exceed the chain link height.
Integrated strain relief cog
Q040, Q060
The Aluminium strain relief cog is fixed into
the recesses on the connecting piece.
The strain relief cogs at the fixed point and
at the driver connection are identical!
Strain relief cog L P = B i + 16 mm
Saddle-type and Block Clamps
for Q060
The C-Profile is fixed into the recesses in
the connecting piece.
The strain relief at the fixed point and at the
driver connection is identical!
C-Profile length L P = B i + 18 mm
The C-Profile fits all commercial saddletype
clamps with a small base and corresponding
block clamps
(slit width 11-12 mm).
The recess in the connecting piece is
suitable for all commercial C-Profiles
measuring 25 x 10 mm and 25 x 12 mm.
6.20 We reserve the right to make technical changes!