Carriers

Technical Data - QUANTUM-Series
Type Q080
Divider systems
for Stay variant “RV“
Divider system TS 4
with continuous height subdivision
Height subdivision: Al-Profile 27 x 8 mm
Design 2
25
Design 1
25
a x
B i
s T
KR
s T = 4 mm
a x min = 15 mm
Half dividers can slide along the chain cross-section.
At least 2 half-dividers with clasp grips on both sides
(Design 1) should be fitted in the upper and lower
chambers near to the chain band.
Please state the the number and design
of dividers/cross section when ordering.
Sample order:
Divider system TS 4
Please enclose a sketch
For connection dimensions
cf. page 4.33
Ordering Key for the cable carrier:
Q 080.400 - RV - 250 - 2025
Example:
QUANTUM cable carrier system Q 080, inside width B i 400 mm, frame
stay RV, bend radius KR 250 mm and chain length L k = 2025 mm.
Type
Inside width B i in mm
Stay variant
Bend radius KR in mm
Chain length L k in mm (without connection)
4.18 Subject to technical changes! QUANTUM