Carriers

System Components
Support Tray
One-piece design
s
h A
As has already been stated in the Technical Data for the individual cable
carriers, a flat and level surface is required for the reliable and safe operation
of the carrier system. If this is not available, a support tray must be
used.
All support trays can be supplied in galvanised steel plate and high-grade
steel. The choice of material depends on the application conditions and
your requirements.
The standard delivery length is 2 m. On request we can produce components
of any desired length up to 3 m.
Special lengths in excess of 3m also present no problem to us.
Please consult us for more details.
You will find further information on 2D and 3D CAD Data on the
internet at www.kabelschlepp.de.
b 1
B A
L A
Ü B
l 1
Length of Support Tray:
(with standard connection)
Ordering Example:
Support tray - one-piece design
for cable carrier Type MC
0950.250 - RV
Length LA 3250 mm
L s
L A = + Ü B + l 1
2
Ü B − Loop overhang
l 1 − Connection length
Where there is strain relief at the fixed point
the length of the support tray should be
increased accordingly!
Materials:
Galvanised steel plate
High-grade steel plate
Aluminium plate
Overview of Support Trays -one-piece
Dimensions in mm
MONO Inside Total Total Plate
TKC Width Width Height Depth
CF UNIFLEX K-Series M-Series XL-Series QUANTUM b 1 B A h A s
0450 0455 MK-,MT 0475 Q040 B k + 6 B 1 + 15 20 1.5
0555 B k + 6 B 1 + 15 20 1.5
0625 0600 KC 0650 MC-,ME-,MK Q060 B k + 10 B 1 + 15 20 1.5
0665 KE 0650 MT 0650
KC 0900 MC-,ME-,MK Q080 Bk + 15 B1 + 25 30 2.0
KE 0900 MT 0950
MC-,ME-,MK Q0100 B k + 15 B 1 + 30 40 3.0
MT 1250
XLC-, B k + 20 B 1 + 40 50 3.0
XL-1650
TKC 340 B k + 6 B 1 + 15 20 1.5
TKC 470 B k + 7 B 1 + 15 20 1.5
TKC 640 B k + 8 B 1 + 25 30 2.0
TKC 850 B k + 10 B 1 + 30 40 3.0
CF 055 65 80 20 1.5
CF 060 65 80 20 1.5
CF 085 100 115 20 1.5
CF 115 130 150 30 2.0
CF 120 135 165 30 2.0
CF 175 200 230 40 3.0
We recommend that for small types not listed in the table guide channel profiles without a support be used as support trays.
We reserve the right to make technical changes! 6.01