Carriers

Technical Data - QUANTUM-Series
Type Q080
Divider systems
for Stay variant “RE“
Divider system TS 4
with continuous height subdivision
Height subdivision:
Plastic Profile 27 x 8 mm
Design 2
25
Design 1
25
a x
B i
s T
KR
s T = 4 mm
a x min = 15 mm
Half-dividers can slide along the chain cross-section.
At least 2 half-dividers with clamp grips on both
sides (Design 1) should be fitted in the lower
chamber near to the chain band.
Please state the number and design of
the dividers/cross section when ordering.
Sample order:
Divider system TS 4
Please enclose a sketch
For Connection dimensions
cf. page 4.33
Ordering Key for the cable carrier:
Q 080.400 - RE - 250 - 2025
Example:
QUANTUM cable carrier system Q 080, inside width B i 400 mm, frame
stay RE, bend radius KR 250 mm and chain length L k = 2025 mm.
Type
Inside width B i in mm
Stay variant
Bend radius KR in mm
Chain length L k in mm (without connection)
4.22 Subject to technical changes! QUANTUM