Carriers

System Components
Positioning of the Strain
Relief Devices
SZL Strain Relief Devices for
Q060
The rear C-Profile is fixed into the recesses
in the connecting piece.
The front C-Profile can be fixed with
screws.
The strain relief at the fixed point and at the
driver connection is identical!
C-Profile length L P = B i + 30 mm
The recess in the connecting piece is
suitable for all commercial C-Profiles
measuring 25 x 10 mm and 25 x 12 mm.
Saddle-type and Block Clamps
and SZL Strain Relief Devices
for Q080 and Q100
The C-Rail is fixed into the recesses on the
connecting piece.
The strain relief at the fixed point and at the
driver connection is identical!
C-Rail length L P = B i + 30 mm
The C-Rail fits all commercial saddle-type
clamps with a large base, corresponding
block clamps and SZL strain relief devices
(slit width 16 – 17 mm).
We reserve the right to make technical changes! 6.21