Carriers

Technical Data - QUANTUM-Series
Type Q060
Divider systems
for Stay variant “RE“
Technically possible variants: VR 0, VR 2 and VR 3
Dividers fixed by height subdivision profiles, the grid segments can
slide along the cross-section (Version A) or are fixed (Version B)!
Divider system TS 2
with plastic grid subdivision 11 x 4
VR 0
VR 14 VR 5 VR 1 VR 0
Height subdivision:
Version A Version B
s T 4.2 mm 4.2 mm
a T min 14 mm 14 mm
a x min 13 mm 16 mm
(with subdivision)
a x min (at VR 0) 16 mm 16 mm
a x grid 1 mm 8 mm
42
a TL
19 8 8
9 29
19 19
42
s T
a x1 a TR
B i
4
2
3 1 5
10
of the
KRPosition
sub-division(s)
in the divider
Sample order: Divider system TS 2
K(cavity) 1 - VR 0 / 40 mm
K 2 - VR 1 / 98 mm
K 3 - VR 2 / 62 mm
With version B a x must be divisible by 8!
Please indicate the cavities (from left to right), the relevant
subdivision variant and the assembly spacing a T and a x
when ordering.
Divider system TS 3
with height subdivision
Plastic Partitions
Technically recommended variants: VR 0, VR 1, VR 2 and VR 3
Dividers fixed by height subdivision profiles, the grids can slide along
the chain cross section!
VR0
VR 1 VR 2 VR 145 VR 23
42
19
19
12
26
5
5 10 10
12
12 10
4
2
1
3
5
14
a TL
B i
a x1 a x2
s T
a TR
Twin divider
KR
Position of the
sub-division(s)
in the divider
Assembly of
Twin divider
s T = 8 mm
a T min = 11 mm
a x min = 8 mm (with height subdivision)
a x grid = cf. a x -table
The twin divider can be moved, suitable
for later assembly/fitting.
a x mm (Centre-to-centre distance of dividers)
16 18 23 28 32 33 38 43 48 58 64 68 78 80 88
96 112 128 144 160 176 192 208
When using partitions with a x > 112 mm, a twin divider should be
used to provide an additional central support.
s T min = 3 mm
Sample order: Divider system TS 3
K(cavity) 1- VR 0 / 24 mm
K 2 - VR 1 / 38 mm
K 3 - VR 23 / 128 mm
with twin divider
ax
4.0
Please indicate the cavities (from left to right),
the relevant subdivision variant and the assembly
spacing a T and a x when ordering.
4.12 Subject to technical changes! QUANTUM