Carriers

Design Guidelines
Horizontal arrangement
“turned through 90° - straight”
(lying on its side)
This arrangement can be realised with almost all types of cable carrier!
Definition:
The cable carrier installed in a normal horizontal arrangement is turned
through 90°, ie it slides on the outside of the band or on special sliding
discs on a support or in a channel.
EBV 07
Application:
Generally, cable carriers “turned through 90°” are used if the installation
area, particularly with regard to height, is so restricted that a “normal”
horizontal installation is not possible.
The installed cables / hoses must be guided in the cross-section of the
cable carrier, clearly separated from one another, by fixed dividers or
in a hole stay. Only in this way can long term damage be avoided.
The best technical solution for this is the hole stay, which permits the optimum
guidance of cables / hoses in the carrier.
Wrong!
Frame stay with
adjustable dividers
Frame stay with
fixed dividers
Optimum separation
of the cables/hoses
in a hole stay
Principally we differentiate between:
1.
2.
Installations for short travel lengths
with or without support
Installations for long travel lengths
with or without support
We reserve the right to make technical changes! 2.15