OS-C501
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Offshore Standard DNV-<strong>OS</strong>-<strong>C501</strong>, November 2013<br />
App.H Example for representative data – Unidirectional carbon tapes made of TPW tape with “5631” fibres – Page 243<br />
H.1 General<br />
H.1.1<br />
APPENDIX H EXAMPLE FOR REPRESENTATIVE DATA –<br />
UNIDIRECTIONAL CARBON TAPES MADE OF<br />
TPW TAPE WITH “5631” FIBRES<br />
H.1.1.1 This appendix describes an example of a set of data for a carbon fibre reinforced epoxy laminate. The<br />
laminates were made of Carbon Tape TPW reinforced by four different types of fibres.<br />
H.1.1.2 Data were supplied by Tenax Fibers, Germany.<br />
H.1.1.3 Laminates made of similar carbon fibres may be similar to this example and can be qualified according<br />
to Sec.4 [8.6] - Qualification against representative data.<br />
H.1.1.4 Matrix dominated properties may change considerably when changing the resin system.<br />
H.1.1.5 Laminates made of carbon fibres with different characteristics may have very different properties from<br />
the ones listed here.<br />
H.1.1.6 Representative data for other materials can be measured and used like this example, as long as the<br />
requirements given in Sec.4 [8.5] and [8.6] are fulfilled.<br />
H.1.1.7 There is a lack of data for matrix dominated properties and of properties in air and water. Properties<br />
in other fluids are not listed, since only few and specific data exist. If such properties are needed some<br />
qualification testing may be required.<br />
H.2 Definition of material<br />
The material is described according to Sec.4 [8.5.2].<br />
Table H-1 Properties to define the material<br />
A B C D<br />
Requirements to group measurements from different laminates<br />
Constituent materials: Tenax STS 5631<br />
1600tex<br />
f24000 t0<br />
Generic Fibre type Carbon-PAN<br />
Precursor<br />
Bundle type<br />
24k filaments per<br />
tow<br />
Fibre trade name<br />
STS 5631 1600tex<br />
f24000 t0<br />
Tenax HTS 5631<br />
800tex<br />
f12000 t0<br />
Carbon-PAN<br />
Precursor<br />
12k filaments per<br />
tow<br />
HTS 5631 800tex<br />
f12000 t0<br />
Tenax HTS 5631<br />
1600tex<br />
f24000 t0<br />
Carbon-PAN<br />
Precursor<br />
24k filaments per tow<br />
Tenax UTS 5631<br />
800tex<br />
f12000 t0<br />
Carbon-PAN<br />
Precursor<br />
12k filaments per tow<br />
HTS 5631 1600tex<br />
f24000 t0<br />
UTS 5631 800tex<br />
f12000 t0<br />
Type of tape Unidirectional Unidirectional Unidirectional Unidirectional<br />
Type of sizing Epoxy compatible Epoxy compatible Epoxy compatible Epoxy compatible<br />
Fibre Manufacturer Tenax Fibers<br />
Germany<br />
Tenax Fibers<br />
Germany<br />
Tenax Fibers Germany Tenax Fibers<br />
Germany<br />
Tape Manufacturer EPO GMBH<br />
Germany<br />
Fabric trade name and batch<br />
number<br />
UDO UD CST 250/<br />
150 FT 102 38%<br />
UD-Prepreg<br />
TPW0610<br />
UD-Prepreg<br />
TPW0603<br />
UD-Prepreg<br />
TPW0611<br />
Generic resin type (e.g. Epoxy Epoxy Epoxy Epoxy<br />
epoxy, polyester)<br />
Specific resin type (trade<br />
name, batch number)<br />
FT110-3550-1 Araldit LY566/<br />
HY906<br />
Araldit LY566/HY906 Araldit LY566/<br />
HY906<br />
Catalyst --- --- --- ---<br />
Accelerator --- --- --- ---<br />
Fillers --- --- --- ---<br />
Additives --- --- --- ---<br />
Process parameters:<br />
Laminator (company)<br />
Tenax Fibers<br />
Germany<br />
Tenax Fibers<br />
Germany<br />
Tenax Fibers Germany Tenax Fibers<br />
Germany<br />
DET NORSKE VERITAS AS