OS6860(E)_AOS_8.1.1.R01_Switch_Management_Guide

Overview of User Accounts
Managing Switch User Accounts
Quick Steps for Network Administrator User Accounts
1 Configure the user with the relevant username and password. For example, to create a user called
thomas with a password of techpubs, enter the following:
-> user thomas password techpubs
For information about creating a user and setting up a password, see “Creating a User” on page 6-8.
2 Configure the user privileges (and SNMP access) if the user should have privileges that are different
than those set up for the default user account. For example:
-> user thomas read-write domain-network ip-helper telnet
For information about the default user settings, see the next section. For information about setting up privileges,
see “Configuring Privileges for a User” on page 6-15.
Note. Optional. To verify the user account, enter the show user command. The display is similar to the
following:
-> show user thomas
User name = thomas,
Password expiration = None,
Password allow to be modified date
Account lockout = None,
Password bad attempts = 0,
Read Only for domains = None,
Read/Write for domains = Network ,
Snmp allowed = NO
Console-Only = Disabled
= None,
For more information about the show user command, see the OmniSwitch AOS Release 8 CLI Reference
Guide.
page 6-6 OmniSwitch AOS Release 8 Switch Management Guide May 2014