OS6860(E)_AOS_8.1.1.R01_Switch_Management_Guide

SNMP Traps Table
No. Trap Name Objects Family Description
141 smgrSdpBindHwError alaSvcId,
alaSdpBindId,
alaSdpBindNetworkPort,
alaSdpBindB-
Vlan,
alaSdpBindSystemId,
alaSdpBindVirtualPort
service
manager
This trap is sent when there is a
failure to allocate/de-allocate a
hardware resource for an SDP
Bind, or to program the hardware
tables for an SDP Bind.
alaSvcId—The Service identifier.
alaSdpBindId—The SDP Binding identifier.
alaSdpBindNetworkPort—The network port associated with a service instance where MPLS-labeled or B-
Domain packets ingress and egress.
alaSdpBindBVlan—The Backbone VLAN ID (B-VLAN) associated with the SDP Bind object.
alaSdpBindSystemId—The neighbor Backbone MAC (B-MAC) associated with the SDP Bind object.
alaSdpBindVirtualPort—The logical representation of a network port associated with a service instance
where MPLS-labeled or B-Domain packets ingress and egress.
142 smgrGeneralError alaSvcId,
alaSvcType
alaSvcId—The Service identifier.
alaSvcType—The service type (e.g. vpls, spb).
143 smgrStatusChange alaSvcId,
alaSvcType,
alaSvcOperStatus,
alaSvcNum-
Saps,
alaSvcNumSdps
service
manager
service
manager
This trap is sent when there is a
.general system failure detected
during normal system operation
This trap is sent when there is a
status change for a group of
selected services.
alaSvcId—The Service identifier.
alaSvcType—The service type (e.g., vpls, spb).
alaSvcOperStatus—The operating state of this service. The requirements for a service to be operationally up
depend on the service type: TLS Services are 'up' when the service is administratively up and either at least two
SAP's or spoke SDP Bind's, or one SAP or spoke SDP Bind and at least one mesh SDP Bind are operationally
up.
alaSvcNumSaps—The number of SAPs defined on this service.
alaSvcNumSdps—The number of SDPs bound to this service.
144 portViolationNotificationTrap ifIndex port This trap is sent when a port violation
is cleared.
ifIndex—A unique value, greater than zero, for the interface.
145 multiChassisConsisFailureRecovered multiChassis-
ConsisFailureRecovered
multi-chassis
This trap is sent when the system
has recovered from a multi-chassis
inconsistency between the
local and peer switches.
multiChassisConsisFailureRecovered—Indicates that the system has recovered from a multi-chassis failure.
page B-34 OmniSwitch AOS Release 8 Switch Management Guide May 2014