OS6860(E)_AOS_8.1.1.R01_Switch_Management_Guide

SNMP Traps Table
No. Trap Name Objects Family Description
51 lpsViolationTrap lpsTrap-
SwitchName
lpsTrapSwitchIpAddr
lpsTrap-
SwitchSlice
lpsTrapSwitch-
Port
lpsTrapViolatingMac
lpsTrapViolationType
systemServices-
Date
systemServices-
Time
bridge
A Learned Port Security (LPS)
violation has occurred.
lpsTrapSwitchName—The name of the switch.
lpsTrapSwitchIpAddr—The IP address of switch.
lpsTrapSwitchSlice— The physical slice number for the LPS port on which the violation occurred.
lpsTrapSwitchPort—The physical port number on which the violation occurred.
lpsTrapViolatingMac—The violating MAC address.
lpsTrapViolationType—The type of violation that occurred on the LPS port.
systemServicesDate—This object contains the current System Date in the following format: MM/DD/YYYY.
systemServicesTime—This object contains the current System Time in the following format: HH:MM:SS.
52 lpsPortUpAfterLearningWindowExpiredT
lpsTrap-
SwitchName
lpsTrap-
SwitchSlice
lpsTrapSwitch-
Port
systemServices-
Date
systemServices-
Time
bridge
lpsTrapSwitchName—The name of the switch.
lpsTrapSwitchSlice—The slot number for the LPS port on which the violation occured
lpsTrapSwitchPort—The port number for the LPS port on which the violation occured
systemServicesDate—The current System Date in the following format: MM/DD/YYYY.
systemServicesTime—The current System Time in the following format: HH:MM:SS.
53 lpsLearnTrap lpsLearnTrap-
Threshold
bridge
This trap is sent when an LPS
port joins or is enabled after the
Learning Window is expired, disabling
the MAC address learning
on the port.
This trap is also generated at the
time the Learning Window
expires, with a slice and port
value of 0.
This trap is sent when the number
of bridged MACs learned
matches the configured Learned
Trap Threshhold. A trap is then
generated or every additional
MAC that is learned.
lpsLearnTrapThreshold—The number of bridged MAC addresses that can be learned before a trap is sent.
54 gvrpVlanLimitReachedEvent alaGvrpMax-
VlanLimit
bridge
This trap is sent when the number
of dynamically-learned
VLANs has reached the configured
limit.
OmniSwitch AOS Release 8 Switch Management Guide May 2014 page B-15