29.04.2019 Views

OS6860(E)_AOS_8.1.1.R01_Switch_Management_Guide

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

SNMP Traps Table<br />

No. Trap Name Objects Family Description<br />

93 vRtrIsisMaxAreaAddrsMismatch vRtrIsisMax-<br />

AreaAddress,<br />

vRtrIsisIfIndex<br />

vRtrIsisPDU-<br />

Fragment<br />

vRtrIsisMaxAreaAddress—The maximum number of area addresses in the PDU.<br />

vRtrIsisIfIndex—The ISIS interface on which the PDU was received.<br />

vRtrIsisPDUFragment—The first 64 bytes of a PDU that triggered the trap.<br />

94 vRtrIsisOwnLSPPurge vRtrIsisIfIndex,<br />

vRtrIsis-<br />

TrapLSPID<br />

vRtrIsisSystem-<br />

Level<br />

isis<br />

isis<br />

This trap is sent when a PDU<br />

with a different Maximum Area<br />

Addresses value is recieved. The<br />

notification includes the header<br />

of the packet, which may help a<br />

network manager identify the<br />

source of the problem.<br />

This trap is sent when sent when<br />

a PDU is received with the system<br />

ID and zero age. This notification<br />

includes the circuit Index<br />

if available, which may help a<br />

network manager identify the<br />

source of theproblem.<br />

vRtrIsisIfIndex—The ISIS interface on which the PDU was received.<br />

vRtrIsisTrapLSPID—An Octet String that uniquely identifies a Link State PDU.<br />

vRtrIsisSystemLevel—Identifies the level to which the notification applies.Routing within an area is referred<br />

to as Level-1 routing. Routing between two or more areas is referred to as Level 2 routing. Each area runs a separate<br />

copy of the basic link-state routing algorithm.<br />

95 vRtrIsisSequenceNumberSkip vRtrIsis-<br />

TrapLSPID<br />

vRtrIsisIfIndex<br />

vRtrIsisSystem-<br />

Level<br />

isis<br />

If an LSP without System ID and<br />

different contents is received, the<br />

LSP may be reissued with a<br />

higher sequence number.<br />

If two Intermediate Systems are<br />

configured with the same System<br />

ID, the sequence number is<br />

increased and this notification is<br />

sent.<br />

vRtrIsisTrapLSPID—An Octet String that uniquely identifies a Link State PDU.<br />

vRtrIsisIfIndex—The ISIS interface on which the PDU was received.<br />

vRtrIsisSystemLevel—Identifies the level to which the notification applies.Routing within an area is referred<br />

to as Level-1 routing. Routing between two or more areas is referred to as Level 2 routing. Each area runs a separate<br />

copy of the basic link-state routing algorithm.<br />

96 vRtrIsisAutTypeFail vRtrIsisSystem-<br />

Level,<br />

vRtrIsisPDU-<br />

Fragment,<br />

vRtrIsisIfIndex<br />

isis<br />

This trap is sent when a PDU<br />

with the wrong authentication<br />

type is received. The notification<br />

includes the header of the packet,<br />

which may help a network manager<br />

identify the source of the<br />

problem.<br />

vRtrIsisSystemLevel—Identifies the level to which the notification applies.Routing within an area is referred.<br />

to as Level-1 routing. Routing between two or more areas is referred to as Level 2 routing. Each area runs a separate<br />

copy of the basic link-state routing algorithm.<br />

vRtrIsisPDUFragment—Contains up to the first 64 bytes of a PDU that triggered the trap.<br />

vRtrIsisIfIndex—The ISIS interface on which the PDU was received.<br />

page B-22 Omni<strong>Switch</strong> <strong>AOS</strong> Release 8 <strong>Switch</strong> <strong>Management</strong> <strong>Guide</strong> May 2014

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!