OS6860(E)_AOS_8.1.1.R01_Switch_Management_Guide

Working With Configuration Files
Creating Snapshot Configuration Files
Creating Snapshot Configuration Files
You can generate a list of configurations currently running on the switch by using the configuration
snapshot command. A snapshot is a text file that lists commands issued to the switch during the current
login session.
Note. A user must have read and write permission for the configuration family of commands to generate a
snapshot file for those commands. See the “Switch Security” chapter of this manual for further information
on permissions to specific command families.
Snapshot Feature List
You can specify the snapshot file so that it will capture the CLI commands for one or more switch features
or for all network features. To generate a snapshot file for all network features, use the following syntax:
-> configuration snapshot all
To generate a snapshot file for specific features, user the CLI help to get a list of all available features:
-> configuration snapshot ?
You may enter more than one network feature in the command line. Separate each feature with a space
(and no comma). The following command will generate a snapshot file listing current configurations for
the vlan, qos, and snmp command families.
-> configuration snapshot vlan qos snmp
OmniSwitch AOS Release 8 Switch Management Guide May 2014 page 5-9