OS6860(E)_AOS_8.1.1.R01_Switch_Management_Guide

SNMP Traps Table
No. Trap Name Objects Family Description
89 vRtrIsisManualAddressDrops isis-
ManAreaAddrExistState
isis
This trap is sent when one of the
manual area addresses assigned
to this system is ignored when
computing routes. The object
vRtrIsisManAreaAddrExistState
describes the area that has been
dropped.
This trap is edge triggered, and
should not be regenerated until
an address that was used in the
previous computation has been
dropped.
isisManAreaAddrExistState—The area ID that was ignored when computing routes.
90 vRtrIsisCorruptedLSPDetected vRtrIsisSystem-
Level
vRtrIsis-
TrapLSPID
isis
This trap is sent when an LSP
that was stored in memory has
become corrupted.
The LSP ID is forwarded. The ID
may be known, but in some
implementations there is a
chance that the ID itself will be
corrupted.
vRtrIsisSystemLevel—Identifies the level to which the notification applies.Routing within an area is referred
to as Level-1 routing. Routing between two or more areas is referred to as Level 2 routing. Each area runs a separate
copy of the basic link-state routing algorithm.
vRtrIsisTrapLSPID—An Octet String that uniquely identifies a Link State PDU.
91 vRtrIsisMaxSeqExceedAttempt vRtrIsisSystemLevel
vRtrIsis-
TrapLSPID
isis
This trap is sent when the
sequence number on an LSP
wraps the 32 bit sequence
counter.
vRtrIsisSystemLevel—Identifies the level to which the notification applies.Routing within an area is referred
to as Level-1 routing. Routing between two or more areas is referred to as Level 2 routing. Each area runs a separate
copy of the basic link-state routing algorithm.
vRtrIsisTrapLSPID—An Octet String that uniquely identifies a Link State PDU.
92 vRtrIsisIDLenMismatch vRtrIsisField-
Len
vRtrIsisIfIndex
vRtrIsisPDU-
Fragment
vRtrIsisFieldLen—The System ID Field length.
vRtrIsisIfIndex—The ISIS interface on which the PDU was received.
vRtrIsisPDUFragment—The first 64 bytes of a PDU that triggered the trap.
isis
This trap is sent when when a
PDU with a different System ID
Length is received. The notification
includes the index to identify
the circuit for the PDU and the
header of the PDU, which may
help a network manager identify
the source of the problem.
OmniSwitch AOS Release 8 Switch Management Guide May 2014 page B-21