OS6860(E)_AOS_8.1.1.R01_Switch_Management_Guide

Verifying File Configuration
Working With Configuration Files
Verifying File Configuration
You can verify the content and the status of the switch’s configuration files with commands listed in the
following table.
show configuration status
show configuration snapshot
write terminal
Displays whether there is a pending timer session scheduled for a configuration
file and indicates whether the running configuration and the
saved configuration files are identical or different. This command also
displays the number of error files that will be held in the flash directory.
Generates a snapshot file of the switch’s non-default current running
configuration. A snapshot can be generated for all current network features
or for one or more specific network features. A snapshot is a single
text file that can be viewed, edited, and reused as a configuration
file.
Displays the switch’s current running configuration for all features.
page 5-12 OmniSwitch AOS Release 8 Switch Management Guide May 2014