OS6860(E)_AOS_8.1.1.R01_Switch_Management_Guide

SNMP Traps Table
No. Trap Name Objects Family Description
134 smgrServiceError alaSvcId,
alaSvcType,
alaSvcIsid,
alaSvcBVlan,
alaSvcMulticastMode
service
manager
This trap is sent when there is a
failure to create/delete a service.
alaSvcId—The Service identifier.
alaSvcType—The service type (e.g., vpls, spb).
alaSvcIsid—The I-Domain Service Indentifier (I-SID), which identifies the service instance in a PBB network
in a BEB switch. For a customer packet flowing to the B-Domain, the I-SID is derived from the VFI and
inserted into the packet. For a packet flowing from the B-Domain, the I-SID is used to identify the VFI for the
I-Domain processing.
alaSvcBVlan—The Backbone VLAN ID (BVLAN), which defines the B-Domain for the PBB traffic.
alaSvcMulticastMode— The multicast replication mode for each service:
• Head-End (1) - where a non-unicast packet entering the SAP port is replicated once for each receiver in the
B-Domain using its unicast BMAC.
• Tandem (2) - where a non-unicast packet entering the SAP port is replicated once at each node using the
multicast group address.
135 smgrServiceHwError alaSvcId,
alaSvcType,
alaSvcVFI,
alaSvcMcIndex
service
manager
This trap is sent when there is a
failure to allocate/de-allocate a
hardware resource for a service,
or to program the hardware
tables for a service.
alaSvcId—The Service identifier.
alaSvcType—The service type (e.g., vpls, spb).
alaSvcVFI—The Virtual Forwarding Instance (VFI) allocated for a service on an LER or BEB switch. This service
instance defines the forwarding plane for the data packets among virtual port members associated with the
VFI. The VFI has one-to-one mapping relationship with the Service IDfor this service instance.
alaSvcMcIndex—The Multicast Index associated with a VFI, which is used to setup the multicast replication
logic for this service instance on the LER or BEB switch. The McIndex has one-to-one mapping relationship
with the Service ID for this service instance.
136 smgrSapError alaSvcId,
alaSapPortId,
alaSapEncapValue
service
manager
This trap is sent when there is a
failure to create/delete a Service
Access Point.
alaSvcId—The Service identifier.
alaSapPortId—The ID of the access port where this SAP is defined.
alaSapEncapValue—The value of the label used to identify this SAP on the access port specified by the SAP
Port ID.
137 smgrSapHwError alaSvcId,
alaSapPortId,
alaSapEncapValue,
alaSvcVFI,
alaSapVirtual-
Port
service
manager
This trap is sent when there is a
failure to allocate/de-allocate a
hardware resource for a SAP, or
to program the hardware tables
for a SAP.
page B-32 OmniSwitch AOS Release 8 Switch Management Guide May 2014