OS6860(E)_AOS_8.1.1.R01_Switch_Management_Guide

Recommendations

Info

Virtual Chassis Default Values Configuring Virtual Chassis Virtual Chassis Default Values The table below lists default values for Virtual Chassis. Parameter Description Command Default Value/Comments Chassis Identifier virtual-chassis configuredchassis-id 0 Chassis group identifier virtual-chassis chassis-group 0 Chassis priority virtual-chassis configuredchassis-priority 100 Hello-interval virtual-chassis hello-interval 15 seconds Control VLAN virtual-chassis configuredcontrol-vlan 4094 page 13-4 OmniSwitch AOS Release 8 Switch Management Guide May 2014
Configuring Virtual Chassis Quick Steps for Automatically Configuring A Virtual Chassis Quick Steps for Automatically Configuring A Virtual Chassis Follow the steps below for a quick tutorial on configuring multiple chassis to automatically operate as a Virtual Chassis. Additional information on how to configure a Virtual Chassis is provided in the section “Configuring Virtual Chassis” on page 13-18. Note: The vcsetup.cfg and vcboot.cfg files must NOT be present on the chassis. This is the normal configuration for newly shipped chassis. Automatic Virtual Chassis Creation 1 Connect each chassis to the next in a ring configuration using the dedicated VFL ports. 2 Power on each chassis. 3 The VFL ports will be automatically detected and configured. 4 The chassis with the lowest MAC address will become the Master and be configured with chassis-id 1. 5 All other chassis will become Slave chassis and be assigned a unique chassis-id. Viewing the Virtual Chassis Configuration 1 Use the show virtual-chassis topology command to check the topology of the Virtual Chassis. -> show virtual-chassis topology Local Chassis: 1 Oper Config Oper Chas Role Status Chas ID Pri Group MAC-Address -----+------------+-------------------+--------+-----+------+------------------ 1 Master Running 1 100 0 e8:e7:32:a4:8d:7f 2 Slave Running 2 100 0 e8:e7:32:a4:89:2b 3 Slave Running 3 100 0 e8:e7:32:a4:8c:cd 2 Use the show virtual-chassis consistency command to check the consistency of the virtual chassis. -> show virtual-chassis consistency Legend: * - denotes mandatory consistency which will affect chassis status licenses-info - A: Advanced; B: Data Center; D: DP-Inspect Config Oper Oper Config Chas Chas Chas Hello Control Control Chas* ID Status Type* Group* Interv Vlan* Vlan License* ------+------+---------+-------+------+-------+--------+--------+---------- 1 1 OK OS6860 0 15 4094 4094 2 2 OK OS6860 0 15 4094 4094 3 3 OK OS6860 0 15 4094 4094 3 Use the show virtual-chassis vf-link command to check the status of the of the virtual-link (VFL). -> show virtual-chassis vf-link member-port Chassis/VFLink ID Chassis/Slot/Port Oper Is Primary -------------------+------------------+----------+------------- 1/0 1/1/53 Up Yes 1/1 1/1/54 Up Yes 2/0 2/1/53 Up Yes 2/1 2/1/54 Up Yes 3/0 3/1/53 Up Yes 3/1 3/1/54 Up Yes OmniSwitch AOS Release 8 Switch Management Guide May 2014 page 13-5
Page 1 and 2:
Part No. 060391-10, Rev. A May 2014
Page 3 and 4:
Contents About This Guide .........
Page 5 and 6:
Contents Using the Switch as an FTP
Page 7 and 8:
Contents Account and Password Polic
Page 9 and 10:
Contents Authentication Trap ......
Page 11 and 12:
Contents Firmware Upgrade Files ...
Page 13 and 14:
About This Guide This OmniSwitch AO
Page 15 and 16:
About This Guide Documentation Road
Page 17 and 18:
About This Guide Related Documentat
Page 19 and 20:
1 Logging Into the Switch Logging i
Page 21 and 22:
Logging Into the Switch Quick Steps
Page 23 and 24:
Logging Into the Switch Overview of
Page 25 and 26:
Logging Into the Switch Accessing t
Page 27 and 28:
Logging Into the Switch Setting the
Page 29 and 30:
Logging Into the Switch Using Secur
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Logging Into the Switch Modifying t
Page 37 and 38:
Logging Into the Switch Enabling th
Page 39 and 40:
Logging Into the Switch Enabling th
Page 41 and 42:
2 Managing System Files This chapte
Page 43 and 44:
Managing System Files Switch Admini
Page 45 and 46:
Managing System Files File and Dire
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Managing System Files Loading Softw
Page 55 and 56:
Managing System Files Loading Softw
Page 57 and 58:
Managing System Files Setting the S
Page 59 and 60:
Managing System Files Setting the S
Page 61 and 62:
3 Managing CMM Directory Content Th
Page 63 and 64:
Managing CMM Directory Content CMM
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Managing CMM Directory Content Mana
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Managing CMM Directory Content Usin
Page 77 and 78:
4 Using the CLI Alcatel-Lucent’s
Page 79 and 80:
Using the CLI Command Entry Rules a
Page 81 and 82:
Using the CLI Command Help -> sh vl
Page 83 and 84:
Using the CLI Logging CLI Commands
Page 85 and 86:
Using the CLI Customizing the Scree
Page 87 and 88:
5 Working With Configuration Files
Page 89 and 90:
Working With Configuration Files Tu
Page 91 and 92:
Working With Configuration Files Qu
Page 93 and 94:
Working With Configuration Files Co
Page 95 and 96:
Working With Configuration Files Cr
Page 97 and 98:
Working With Configuration Files Cr
Page 99 and 100:
6 Managing Switch User Accounts Swi
Page 101 and 102:
Managing Switch User Accounts User
Page 103 and 104:
Managing Switch User Accounts Overv
Page 105 and 106:
Managing Switch User Accounts Overv
Page 107 and 108:
Managing Switch User Accounts Creat
Page 109 and 110:
Managing Switch User Accounts Confi
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Managing Switch User Accounts Setti
Page 117 and 118:
Managing Switch User Accounts Multi
Page 119 and 120:
7 Managing Switch Security Switch s
Page 121 and 122:
Managing Switch Security Switch Sec
Page 123 and 124:
Managing Switch Security Authentica
Page 125 and 126:
Managing Switch Security Quick Step
Page 127 and 128:
Managing Switch Security Setting Up
Page 129 and 130:
Managing Switch Security Configurin
Page 131 and 132:
8 Using WebView The switch can be m
Page 133 and 134:
Using WebView WebView CLI Commands
Page 135 and 136:
Using WebView WebView Overview Conf
Page 137 and 138:
9 Using SNMP The Simple Network Man
Page 139 and 140:
Using SNMP Quick Steps for Setting
Page 141 and 142:
Using SNMP Quick Steps for Setting
Page 143 and 144:
Using SNMP SNMP Overview Using SNMP
Page 145 and 146:
Using SNMP Using SNMP For Switch Se
Page 147 and 148:
Using SNMP Using SNMP For Switch Se
Page 149 and 150:
Using SNMP Working with SNMP Traps
Page 151 and 152:
Using SNMP Verifying the SNMP Confi
Page 153 and 154:
10 Web Services, CLI Scripting, and
Page 155 and 156:
Web Services, CLI Scripting, and Op
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172: Web Services, CLI Scripting, and Op
Page 181 and 182: 11 Configuring Network Time Protoco
Page 183 and 184: Configuring Network Time Protocol (
Page 195 and 196: 12 Managing Automatic Remote Config
Page 197 and 198: Managing Automatic Remote Configura
Page 219 and 220: 13 Configuring Virtual Chassis A Vi
Page 221: Configuring Virtual Chassis Virtual
Page 225 and 226: Configuring Virtual Chassis Virtual
Page 227 and 228: Configuring Virtual Chassis Managin
Page 229 and 230: Configuring Virtual Chassis Managin
Page 235 and 236: Configuring Virtual Chassis Interac
Page 237 and 238: Configuring Virtual Chassis Configu
Page 239 and 240: Configuring Virtual Chassis Configu
Page 241 and 242: Configuring Virtual Chassis Display
Page 243 and 244: A Software License and Copyright St
Page 245 and 246: Alcatel-Lucent License Agreement Al
Page 247 and 248: B SNMP Trap Information This append
Page 249 and 250: SNMP Traps Table No. Trap Name Obje
Page 273 and 274:
SNMP Traps Table No. Trap Name Obje
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Index Symbols !! command 4-6 A aaa
Page 295 and 296:
Index Network Time Protocol see NTP
show all

OS6860(E)_AOS_8.1.1.R01_Switch_Management_Guide

Create successful ePaper yourself

Delete template?

Save as template?