OS6860(E)_AOS_8.1.1.R01_Switch_Management_Guide

Verifying the User Configuration
Managing Switch User Accounts
Verifying the User Configuration
To display information about user accounts configured locally in the user database, use the show
commands listed here:
show user
show user password-policy
show user password-policy
show user password-policy
show user lockout-setting
show aaa priv hexa
Displays information about all users or a particular user configured in
the local user database on the switch.
Displays the minimum number of characters that are required for a user
password.
Displays the expiration date for passwords configured for user accounts
stored on the switch.
Displays the global password settings configured for the switch.
Displays the global user lockout settings configured for the switch.
Displays hexadecimal values for command domains/families.
For more information about the resulting displays from these commands, see the OmniSwitch AOS Release
8 CLI Reference Guide. An example of the output for the show user command is also given in “Quick
Steps for Network Administrator User Accounts” on page 6-6.
page 6-20 OmniSwitch AOS Release 8 Switch Management Guide May 2014