SHRP-A-379 traducir

Table 1. Correction Factors for Horizontal and Vertical Stress
Diameter to Thickness Ratio, (t/D)
D = 100 mm or 150 p 0.167 0.333 0.500 0.625 0.750
mm
C,_ 0.20 0.9471 0.9773 1.0251 1.0696 1.1040
0.35 0.9561 1.0007 1.0871 1.1682 1.2321
0.45 0.9597 1.0087 1.1213 1.2307 1.3171
C,y 0.20 -0.9648 -0.9754 -0.9743 -0.9693 -0.9611
0.35 -0.9732 -0.9888 -0.9844 -0.9710 -0.9538
0.45 -0.9788 -0.9971 -0.9864 -0.9646 -0.9395
Table 2. Bulging Correction
Factors
Diameter to Thickness Ratio, (t/D)
D = 100 mm or 1, 0.167 0.333 0.500 0.625 0.750
150 mm
Csx 0.20 0.9816 0.9638 0.9461 0.9358 0.9294
0.35 0.9751 0.9518 0.9299 0.9179 0.9108
0.45 0.9722 0.9466 0.9234 0.9111 0.9040
CBr 0.20 0.9886 0.9748 0.9677 0.9674 0.9688
0.35 0.9808 0.9588 0.9479 0.9473 0.9493
0.45 0.9759 0.9492 0.9364 0.9358 0.9380
133