SHRP-A-379 traducir

12.1.3 Aggregate Type and Gradation
12.1.4 Mixing and Compaction Conditions--the following information is applicable:
12.1.4.1 Plant Mixing Temperature--in degrees Celsius to the nearest I°C
12.1.4.2 Laboratory Mixing Temperature--in degrees Celsius to the nearest 1 °C
12.1.4.3 Laboratory Compaction Temperature--in degrees Celsius to the nearest 1°C
12.1.4.4 Laboratory Compaction Method
12.1.4.5 Compacted Specimen Height--in centimeters to the nearest 0.15 cm
12.1.4.6 Compacted Specimen Diameter--in centimeters to the nearest 0.15 cm
12.1.4.7 Compacted Specimen Area--in square centimeters to the nearest 0.02 cm /
12.1.4.8 Compacted Specimen Density--in kilograms per square meter to the nearest
0.02 cm 2
12.1.4.9 Compacted Specimen Air Voids--in percent to the nearest 0.1%
12.1.5 Coefficient of Permeability for Air Flow--a table listing of the following
results for each different pressure applied:
12.1.5.1 Chamber Testing Temperature--in degrees Celsius to the nearest 0.5°C
12.1.5.2 Differential Pressure--in mm of Hg
12.1.5.3 Air Flow--in cubic centimeters per second to the nearest 2 cm3/s
12.1.5.4 Coefficient of Permeability for Air Flow--in cm/s to the nearest 2 cm/s
12.1.6 ECS Modulus Results--a table listing the following results for each load cycle
(last five cycles) prior to any conditioning cycles and after each conditioning cycle:
12.1.6.1 Chamber of Testing Temperature--in degrees Celsius to the nearest 0.5°C
12.1.6.2 Static Load Applied--in newtons to the nearest 5 N
12.1.6.3 Dynamic Load Applied--in newtons to the nearest 5 N
12.1.6.4 Peak Stress--in kilopascals to the nearest 0.1 kPa
149