SHRP-A-379 traducir

Standard Method of Test for
Determining Moisture Sensitivity Characteristics
of Compacted Bituminous Mixtures Subjected
to Hot and Cold Climate Conditions
SHRP Designation: M-0061
1. SCOPE
1.1 This method determines the water sensitivity or stripping characteristics of
compacted asphalt concrete mixtures under warm and cold climatic conditions.
1.2 This standard may involve hazardous materials, operations, and equipment. This
standard does not purport to address all of the safety problems associated with its use. It is
the responsibility of the user of this standard to establish appropriate safety and health
practices and determine the applicability of regulatory limitations prior to use.
1.3 The values stated in SI units are to be regarded as the standard. The values in
parentheses are for information only.
2. REFERENCED DOCUMENTS
2.1 AASHTO Documents
MP1 Method of Test for Performance-Graded Asphalt Binder
R 11 Practice for Indicating Which Places of Figures are to be Considered Significant in
Specifying Limiting Values
T2 Method for Sampling Aggregates
T27 Method for Sieve Analysis of Fine and Coarse Aggregates
T40 Method for Sampling Bituminous Materials
T164 Method for Quantitative Extraction of Bitumen from Bituminous Paving Mixtures
T167 Method for Compressive Strength of Bituminous Mixtures
T168 Method of Sampling Bituminous Paving Mixtures
T247 Method for Preparation of Test Specimens of a Bituminous Mixture by Means of
the California Kneading Compactor
T269 Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving
Mixtures
1This standard is based on SHRP Product 1024.
137