Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
– 122 –<br />
4.7 File Library<br />
The unit contains a file library in which the presettings of the most important NiTi systems<br />
are saved. The following file systems are available:<br />
1. Mtwo 3. ProFile ® 5. Race 7. Hero ® 9. Gates<br />
2. FlexMaster ® 4. ProTaper ® 6. System GT ® 8. K3 10. Lentulo<br />
Additionally, the Dr´s Choice Individual program is available.<br />
On delivery, the Mtwo, FlexMaster ® systems, Dr`s Choice and Gates are active.<br />
All the other file systems are inactive in the background.<br />
• Press the MENU button, and scroll with the + button until SYSTEM appears at the left in<br />
the display<br />
• Then press the button und the arrow will jump to the right to the file system which you<br />
want to use.<br />
• Press againt the button and the arrow will jump to the right to the field “ON” or “OFF “.<br />
en<br />
• Press again the + button to choose between “On” or “OFF” and then confirm with the<br />
CONFIRM button. (“ON” means visible in the display, “OFF” means invisible in the<br />
background)<br />
NOTE<br />
If all systems have been acci<strong>dental</strong>ly deactivated, the display will read:<br />
Re-activate each file system which is necessary to work with.<br />
WARNING<br />
Torque and speed values are subject to change by the NiTi file manufacturers without notice.<br />
Therefore the preset values in the library must be checked prior to use. Torque values shown<br />
on the screen are accurate and reliable only with Sirona <strong>VDW</strong> 6:1 contra-angles properly<br />
maintained and lubricated.