You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Numonyx <strong>Wireless</strong> <strong>Flash</strong> <strong>Memory</strong> (<strong>W30</strong>)<br />
11.3.5 Exit<br />
The host programmer must reset its initial verify-word address to the same starting<br />
location supplied during the program phase. It then reissues each data word in the<br />
same order as during the program phase. Like programming, the host can write each<br />
subsequent data word to WA 0 or it can increment through the block addresses.<br />
The verification phase concludes when the interfacing programmer writes to a different<br />
block address. The data supplied must be FFFFh. Upon completion of the verify phase,<br />
the flash device enters the EFP exit phase.<br />
SR[7]=1 indicates that the flash device has returned to normal operating conditions.<br />
Perform a full status check at this time, to verify that the entire block programmed<br />
successfully. After EFP exit, any valid CUI command can be issued.<br />
November 2007 Datasheet<br />
Order Number: 290702-13 63