Accutorr Plus Service Manual - Mindray

4.5.4.4 Maintenance
The AccuTemp can be wiped down with any hospital approved disinfectant, including
bleach. With normal use, the only maintenance required is to keep the lens on the end of
the probe clean. The lens is made of polycarbonate. Dirt, greasy films or moisture on the
lens will interfere with the passage of infrared heat and affect the accuracy of the
measurement. If necessary, clean the lens with a cotton swab dipped in alcohol. Periodic
cleaning is recommended. To keep the lens clean when not is use, store the AccuTemp
with an optical film cover in place.
4-8 Added 6/25/99
Accutorr Plus Service Manual
Chapter 4 - Repair Information