e-brick installation and user manual - GEW UV System v1.0
e-brick installation and user manual - GEW UV System v1.0
e-brick installation and user manual - GEW UV System v1.0
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
REMOVE CHASSIS<br />
VCP, eCP, hCP N<strong>UV</strong>Aplus<br />
Pull out the lamp chassis assembly by<br />
unlocking the chassis door with the allen<br />
key supplied.<br />
Remove the 4 cap head bolts to remove the<br />
chassis reflector cassette from the outer<br />
casing. If the shutter is in the closed<br />
position gently push open.<br />
With a 8 mm socket driver remove the M5 nuts <strong>and</strong> M5 washers securing the lamp lead at<br />
both sides. You will notice that the main H.T. leads remain secure<br />
when you undo the lamp leads.<br />
VCP, eCP, hCP N<strong>UV</strong>Aplus<br />
<strong>GEW</strong> <strong>UV</strong> system operating <strong>manual</strong> Issue 1.00 –Sept 2005 E-systems Lamp Change - page 2 of 4