e-brick installation and user manual - GEW UV System v1.0

Recommendations

Info

1.1. Related documentation 1.1.1. GEW Product manuals Document Title VCP user manual ECP user manual NUVA+ user manual e-Brick HMI Software Operating Manual 1.1.2. European (EN) Standards Standard Title EN12100-1:2003 Safety of Machinery – Basic terminology, methodology EN12100-2:2003 Safety of Machinery – Technical principles EN1050:1997 Safety of Machinery – Principles of risk assessment EN12198-1:2000 Safety of Machinery – Assessment and reduction of risks arising from radiation emitted by machinery EN12198-2:2002 Safety of Machinery – Assessment and reduction of risks arising from radiation emitted by machinery EN12198-3:2002 Safety of Machinery – Assessment and reduction of risks arising from radiation emitted by machinery EN954-1:1997 Safety of Machinery – Safety related parts of control systems EN60204-1:1998 Safety of Machinery – Electrical equipment of machines EN61010-1:2001 Safety requirements for electrical equipment for measurement, control and laboratory use EN61000-6-4:2001 Electromagnetic Compatibility – Emission Standard for industrial environments EN61000-6-2:2001 Electromagnetic Compatibility – Immunity for industrial environments EN60529:1992 Degrees of protection provided by enclosures PrEN1010-1 Safety of Machinery – Safety requirements for the design and construction of printing and paper converting machines 1.1.3. British Standards Reference Title BS7671:2001 Requirements for Electrical Installations IEE Wiring Regulations Sixteenth Edition 1.1.4. Guidance notes Reference Title URN04/1106 UK Government Department of Trade and Industry Product Standards: Electrical Equipment (implementing the Low Voltage Directive) URN95/650 UK Government Department of Trade and Industry Product Standards: Machinery GEW UV e-Brick installation and operating manual 8 of 49
1.1.5. Symbols used The following markings are used on GEW e-Brick products and system components: Symbol Reference Description 3~ ~ ISO7000 – 0434 IEC 60417 – 5019 IEC 60417 - 5041 IEC 60417 - 5032 EN50419 Caution, risk of danger. Note: Documentation must be consulted in all cases where this symbol is marked Caution, risk of electric shock Protective Conductor Terminal Caution, hot surface Three phase alternating current Alternating current Table 1: Glossary of symbols used Equipment should not be disposed of in normal waste stream GEW UV e-Brick installation and operating manual 9 of 49
Page 1 and 2: GEW UV DRYING SYSTEM e-Brick (EC) I
Page 3 and 4: 4.7. Conformity ...................
Page 5 and 6: Document Issue Status Issue Date EC
Page 7: 1. Product Description The UV dryin
Page 11 and 12: 2.3. Handling Warning! e-Brick unit
Page 13 and 14: 3.1.2. Fitment of optional feet To
Page 15 and 16: 3.2. Space needed for use and maint
Page 17 and 18: 3.4. Connection to power supply War
Page 19 and 20: 4. Product information 4.1. Descrip
Page 21 and 22: 4.5. General Data 4.5.1. Electrical
Page 23 and 24: 4.6.2. Interface details Refer to s
Page 25 and 26: 4.6.3.1. P1: Press interface Pin co
Page 27 and 28: 4.6.3.5. P5: Power input Pin connec
Page 29 and 30: 4.7. Conformity Equipment Electroni
Page 31 and 32: 5.3. Setting and adjustment The e-B
Page 33 and 34: 5.6. Risk Reduction The GEW enginee
Page 35 and 36: 6. Maintenance information Warning!
Page 37 and 38: 6.5.1. General faults Water cooling
Page 39 and 40: Shutter failure Shutter failure whi
Page 41 and 42: 6.6. Parts list 6.6.1. Recommended
Page 43 and 44: 8. Emergency information 8.1. Fire
Page 45 and 46: 9.1.3. Exhaust filter change Warnin
Page 47 and 48: 10.1. Filter service record System
Page 49 and 50: 11.5. Making a Claim In the event o
Page 51 and 52: Table of Contents 1. Scope.........
Page 53 and 54: 1. Scope This document describes th
Page 55 and 56: Min power (Standby-100%) This sets
Page 57 and 58: Start the lamps Start running Monit
Page 59 and 60:
Lamp power controls Whether power l
Page 61 and 62:
3.4.7. Consumable parts 3.4.8. GEW
Page 63 and 64:
3.5.1. Warning indicators The e-Bri
Page 65 and 66:
Safety switch failure On systems wi
Page 67 and 68:
3.6. HMI Flow chart General operati
Page 69 and 70:
REMOVE CHASSIS VCP, eCP, hCP NUVApl
Page 71:
REMOVE OLD LAMP Holding the lamp by
show all

e-brick installation and user manual - GEW UV System v1.0

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?