Hydrovar Pump Controller Installation & Operation Manual
Hydrovar Pump Controller Installation & Operation Manual
Hydrovar Pump Controller Installation & Operation Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Programming<br />
29<br />
29 4th ERROR<br />
ERROR XX<br />
4th most recent error on the selected drive<br />
Message: ERROR XX, FAILURE TEXT, DATE, TIME<br />
Press ▲ or ▼ to scroll up or down!<br />
30<br />
30 5th ERROR<br />
ERROR XX<br />
5th most recent error on the selected drive<br />
Message: ERROR XX, FAILURE TEXT, DATE, TIME<br />
Press ▲ or ▼ to scroll up or down!<br />
40<br />
41<br />
40 SUBMENU<br />
DIAGNOSTICS<br />
41 PROD. DATE<br />
XX.XX.XXXX<br />
production date of the HYDROVAR (Master/Single only)<br />
In the following parameters the current temperature, voltage and frequency of the chosen HYDROVAR can<br />
be monitored during operation of the unit. These parameters are read only!<br />
42<br />
42 SEL. INVERTER<br />
* 1 *<br />
Possible settings: 1-8<br />
43<br />
43 TEMP. INVERTER<br />
XX % XX°C<br />
Select the desired unit<br />
Temperature of the selected unit<br />
The current value determines the temperature inside the selected HYDROVAR and is shown in °C and also<br />
in percent of the maximum allowed temperature.<br />
44<br />
44 CURR. INVERTER<br />
XXX %<br />
Current of the selected unit<br />
This value determines the output current of the HYDROVAR in percent to the maximum rated current<br />
output.<br />
45<br />
45 VOLT. INVERTER<br />
XXX V<br />
Input Voltage of the selected unit<br />
This value displays the input voltage supplied to the HYDROVAR.<br />
46<br />
46 OUTPUT FREQ.<br />
XX.X Hz<br />
Output frequency of the selected unit<br />
43<br />
G<br />
G<br />
G<br />
G<br />
G<br />
G<br />
G