Repair Manual Mobile Generator - Wacker Neuson
Repair Manual Mobile Generator - Wacker Neuson
Repair Manual Mobile Generator - Wacker Neuson
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
G 70 Disassembly and Assembly<br />
Continued from the previous page.<br />
6. Using Loctite 243 on screws (d), secure the generator flex plates to the engine<br />
flywheel. Remove the 3/8-16 studs. Torque the screws to 45 Nm (33 ft.lbs.).<br />
7. Using Loctite 243 on screws (e), secure the generator housing to the engine bell<br />
housing. Remove the M10 studs. Torque the screws to 86 Nm (45 ft.lbs.).<br />
8. Secure the shock mount (g) to the frame.<br />
9. Connect the ground strap (f).<br />
10.Install the lower bracket (b) of the voltage selector switch box.<br />
11.Connect the appropriate wires to the terminal strip (a).<br />
This procedure continues on the next page.<br />
wc_tx001068gb.fm 91