CNC 8037 T - Operating manual - Fagor Automation

Operating manual
7.4 Tool Offset table
This table stores the dimensions of each tool.
The values of this table can also be modified from the PLC and from the part-program by means
of the high level variables associated with the tools.
The end of the chapter describes how to edit the table. Each offset has a number of fields containing
the tool dimensions. These fields are:
Tool length along the X and Z axes (in radius).
Tool radius.
Tool length wear (I) along the X axis.
It is given in diameters. The CNC will add this value to the nominal length along the X axis in order
to calculate its real length (X+I).
Tool length wear (K) along the Z axis.
The CNC will add this value to the nominal length along the Z axis in order to calculate its real length
(Z+K).
7.
TABLES
Tool Offset table
CNC 8037
·T· MODEL
SOFT: V01.4X
·121·