CNC 8037 T - Operating manual - Fagor Automation

4.
EXECUTE / SIMULATE
Tool inspection
CNC 8037
·T· MODEL
SOFT: V01.4X
·72·
"MODIFY OFFSETS" softkey
Operating manual
This option shows (at the top) a help graphic and the tool fields that can be edited. The data may
be selected with the [] [] [] [] keys or from the softkey menu.
It is also possible to select a new tool to correct it. To select a new tool, enter its number in the T
field and press [ENTER].
The I and K values may be modified for the active tool. To assume the new values, select the
tool again.
The I, K and D values may be modified if it is not the active tool.
The values entered in the I - K fields are incremental; they are added to the ones already in the table.
The "I" data is given in diameter.
The maximum value that may be entered in each I - K field is limited by machine parameters
MAXOFFI and MAXOFFK. When trying to enter a greater value, the relevant message will be
displayed.