CNC 8037 T - Operating manual - Fagor Automation
CNC 8037 T - Operating manual - Fagor Automation
CNC 8037 T - Operating manual - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Operating</strong> <strong>manual</strong><br />
Accessing the system from other devices<br />
Through the WinDNC<br />
From WinDNC it is possible to access the files of user programs, tables and screens located in the<br />
hard disk as well as those located in the USB disk.<br />
The WinDNC can only display the following devices:<br />
Memory.<br />
Default hard disk .<br />
The "default hard disk" will be the first hard disk recognized by the <strong>CNC</strong>. The order of priorities is:<br />
1.Hard disk (KeyCF).<br />
2.USB disk.<br />
3.Remote hard disk.<br />
At the "default hard disk", only the default directory/Prg can be accessed. The rest of the<br />
subdirectories are not accessible.<br />
Via FTP<br />
Accessing the root directory of the DNC requires a WinDNC version 4.1 or higher. Likewise, sending<br />
tables the hard disk requires a WinDNC version 4.1.<br />
It is possible to access (read and write) tables, machine parameters, graphic files and programs from<br />
the network via FTP. All the disks will be available when accessing a <strong>CNC</strong> via FTP:<br />
Hard disk (KeyCF).<br />
USB disk.<br />
Remote hard disk.<br />
2.<br />
OPERATING MODES<br />
KeyCF (KeyCompactFlash)<br />
<strong>CNC</strong> <strong>8037</strong><br />
·T· MODEL<br />
SOFT: V01.4X<br />
·41·
Change language