CNC 8037 T - Operating manual - Fagor Automation
CNC 8037 T - Operating manual - Fagor Automation
CNC 8037 T - Operating manual - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Operating</strong> <strong>manual</strong><br />
3. Information window<br />
This window provides general information about the trace being shown at the time. It shows the<br />
following data:<br />
The "Trigger" shows the trigger condition defined by the user to draw the trace.<br />
The "time base" indicates the time base defined by the user and used to show the current<br />
trace.<br />
The "Trace status" indicates the current status of the trace. The texts shown and their<br />
meanings are:<br />
Empty There is no calculated trace.<br />
Capturing There is a trace in progress.<br />
Complete There is a trace stored.<br />
The "cursor offset" indicates the distance from the cursor, vertical green line, to the trigger<br />
position, vertical red line. It is given in milliseconds.<br />
The "trigger type" indicates the type of trigger currently selected. The texts shown and their<br />
meanings are:<br />
Before The trigger is positioned at the beginning of the trace.<br />
After The trigger is positioned at the end of the trace.<br />
Center The trigger is positioned in the middle of the trace.<br />
Default When no trigger condition has been specified.<br />
4. Editing window.<br />
It is the <strong>CNC</strong>'s standard editing window. It is used for all the processes that require data entry.<br />
5. Message window.<br />
This <strong>CNC</strong> uses this window to show a warning or error message.<br />
10.<br />
PLC<br />
Logic analyzer<br />
<strong>CNC</strong> <strong>8037</strong><br />
·T· MODEL<br />
SOFT: V01.4X<br />
·181·
Change language