CNC 8037 T - Operating manual - Fagor Automation

4.
EXECUTE / SIMULATE
Display
CNC 8037
·T· MODEL
SOFT: V01.4X
·62·
4.2.2 Position display mode
This display mode shows the position values of the axes.
This display mode shows the following fields or windows:
Operating manual
The real position values for the axes that indicate the current position of the machine.
It must be borne in mind that the display format for the axes is established by machine parameter
"DFORMAT" and that real or theoretical position values will be shown depending on the setting
of machine parameter "THEODPLY".
Each axis is provided with the following fields:
PART ZERO This field shows the real axis position with respect to part zero.
MACHINE ZERO This field shows the real axis position with the respect to machine
reference zero (home).