CNC 8035 - Programming manual - Fagor Automation

CNC 8035
·14·
Version history (T)
Software V10.1x December 2004
List of features Manual
Calculation of central unit heat dissipation . INST
New board "Axes2". INST
Automatic keyboard type identification. INST
Frequency filters for axes and spindles. INST
Machine parameters.
INST
COMPMODE (P175). New tool radius compensation methods.
Axis parameters that may be modified from OEM subroutine/program: REFVALUE, REFDIREC,
FLIMIT.
Spindle parameters that may be modified from OEM subroutine/program: REFVALUE,
REFDIREC, SLIMIT.
Variables.
INST / PRG
DNCSTA: DNC communication status.
TIMEG: Status of the timer count programmed with G4
HANDSE: Handwheel's axis selector button pressed.
ANAI(n): Value of the analog inputs.
APOS(X-C): Real coordinates of the tool base, referred to part zero.
ATPOS(X-C): Theoretical coordinates of the tool base, referred to part zero.
Retracing function.
INST
If RETRACAC=2 , the retrace function does not stop at the M functions.
The RETRACAC parameter is initialized with [SHIFT][RESET].
The number of blocks being retraced has been increased to 75.
When activating tool radius compensation in the first motion block even if there is no movement INST
of the plane axes.
Manual intervention with additive handwheel. INST / OPT
G46. Maintain G46 when the home search does not involve any axis of the angular INST / PRG
transformation.
G151-G152. Programming in diameter or radius. PRG
MEXEC. Execute a modal part-program. PRG
Up to 319 G functions now available. PRG
The simulations without axis movement ignore the G4. OPT
Maintain the feedrate selected in simulation. OPT
Software V10.12 February 2005
List of features Manual
Look-ahead. INST / PRG
Software V10.13 April 2005
List of features Manual
Hirth axis pitch may be set in degrees via parameters. INST
Rollover positioning axis. Movement in G53 via the shortest way. INST
Software V10.15 June 2005
List of features Manual
CAN servo system. INST