Certified Proof Manual - image2output - Support

Performing Measurements
Step 2: Select Print Target
http://www.image2output.com
Step 2: Select Print Target
A print target defines the patches to be measured as well as the target
values and tolerances. Select a print target in the main window (see Fig.
3-2).
ORIS Certified Proof provides predefined print targets for various standard
printing conditions (see page 8-2).
The selected print target is indicated on the title bar of the main window.
Fig. 3-2
Main Window – Print Target Selection
Step 3: Create or Customize Print Target
If your company has its own printing standard and color bar, you can customize
the predefined print targets. If you need print targets for measuring
press sheets (density), you have to create them. Proceed as follows:
1. Click on to open the DEFINE PRINT TARGET dialog.
2. Click on NEW in the list of PRINT TARGETS, or select the print target to
be modified from this list (see Fig. 3-3).
3. Enter a name into the TARGET NAME box, or overwrite the existing
name if the original print target should be left unchanged.
4. When creating print targets for press sheets, set the MEASUREMENT
VALUES option to DENSITIES (see Fig. 3-3).
5. Refer to page 8-1 for details on the other dialog options.
6. Click OK to close the dialog.
3-2 CGS Publishing Technologies International Hainburg, Germany 08/27/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com