Certified Proof Manual - image2output - Support
Certified Proof Manual - image2output - Support
Certified Proof Manual - image2output - Support
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Comparing Single Colors<br />
Step 2: Start Measurement Function<br />
http://www.<strong>image2output</strong>.com<br />
Step 2: Start Measurement Function<br />
Click the button on the left-hand side of the main window. This<br />
opens the SINGLE PATCH MEASUREMENT dialog (see Fig. 5-2).<br />
Fig. 5-2<br />
‘Single Patch Measurement’ Dialog<br />
Step 3: Add Reference Colors<br />
In the SINGLE PATCH MEASUREMENT dialog, add the reference colors.<br />
The colors you are about to measure will be compared against these<br />
colors. Use one of the methods described below. Five spot colors are<br />
loaded already by default (see Fig. 5-2).<br />
Using the button you can delete selected colors from the list.<br />
Measuring Colors<br />
1. Click on START MEASUREMENT. A white calibration may be required.<br />
2. Measure the color.<br />
3. Click on to open the ADD COLOR dialog (see Fig. 5-3).<br />
4. Enter a name for the new color, then click OK.<br />
5-2 CGS Publishing Technologies International Hainburg, Germany 08/27/2010<br />
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW<br />
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@<strong>image2output</strong>.com
Change language