Certified Proof Manual - image2output - Support

Miscellaneous
Measuring Tips
http://www.image2output.com
Loading Measurements
Using the button you can load measurement files, e.g. those of
previous measurements or measurements made with another program.
These files must comply with the IT8.7 or CGATS.5 file format.
Using the measurements you have loaded can be added to the
data records collected for creating trend analyses (see page 6-1).
Using the measurements you have added can be removed from
the data stored for trend analysis.
You can also load the measurements of large test charts (e.g.
ECI2002 or IT8.3). The program automatically extracts the values of
the relevant color patches, e.g. the patches of the FOGRA bar. This
requires that all of these patches are available on the test chart.
Repeating or Canceling Measurements
When you click on , the button changes to . This button allows
you to cancel the measuring process.
It is not necessary to press the button when the measurement is
completed. But you can do so if you want to repeat the white calibration.
Some spectrophotometers perform a white calibration whenever you
click on the button.
Click in case of measurement mistakes. The last strip or patch
measurement will be dismissed and you can repeat it.
If this button is clicked at the end of the measurement process or after
loading a measurement file, the entire measurement will be dismissed
and not added to the data collected for trend analysis (see page 6-1).
You can click repeatedly, e.g. to dismiss the measurements of
several patches or of two color strips at the same time.
7-2 CGS Publishing Technologies International Hainburg, Germany 08/27/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com