Certified Proof Manual - image2output - Support

Performing Measurements
Step 7: Print Label
http://www.image2output.com
Color Bar
The color bar displays the target values and the actual values you have
measured. The first strip appears as soon as you have finished measuring
it. This allows you to recognize measurement errors immediately.
The color with the largest deviation is underlined in red.
If you place the cursor on a color patch, the Lab or density values, respectively,
are displayed in a small yellow window. The target values appear
at the top, the actual values at the bottom. The dE values are additionally
indicated as soon as the measurement has been completed.
Fig. 3-6
Color Bar with Target and Actual Colors
Step 7: Print Label
Having completed the measurement, a label is printed automatically, if
this has been specified. If it hasn’t, you can print it manually by clicking
on the button.
The label provides a summary of the measurement results. The icons
and indicate whether all values are within the tolerance limits.
The icon indicates that some of the values are outside the strict tolerances,
but none outside the standard tolerances (2-level tolerances).
The label should be signed by the operator and affixed to the proof or
press sheet. Together with the color bar, the label clearly indicates the
proof’s or press sheet’s quality and identity.
» RELATED TOPICS:
-SETUP LABEL PRINTER (PAGE 8-15)
-2-LEVEL TOLERANCES (PAGE 8-13)
3-6 CGS Publishing Technologies International Hainburg, Germany 08/27/2010
Image2Output Limited Unit 19 IO Centre Hearle Way Hatfield Business Park Hatfield Herts AL10 9EW
Tel: +44 (0)1707 282 710 Fax: +44 (0)1707 269 764 sales@image2output.com