09-10_Academiccatalog(Fullcatalog4.30mb) - Kankakee ...

electrical residential blueprints, wiring diagrams, and layouts.
Students will wire many different residential and commercial
circuits in accordance with the National Electric Code and local
ordinance. Basic tools must be supplied by the student.
ELTR 1223 - Survey of Renewable Energy 3/0 (3)
Prerequisites: Basic computer skills for word processing, performing
internet searches, sending and receiving e-mail; basic
math skills; and ability to use a calculator. This course explores
current environmental, social, and technological issues that are
driving interest in—and spreading the use of—renewable energy
technology. From this background foundation, basic concepts
of energy will be explored and explained, then spring-boarding
into a general examination of energy conservation, and all the
common modes of energy “generation” from renewable sources,
including: Solar-Thermal; Solar-Photovoltaic; Wind Energy;
Hydro-Power; and others. In addition, topics such as alternative
means of space heating, water heating, and alternative transportation
technologies will be explored.
ELTR 1402 - Industrial Safety 2/0 (2)
This course focuses on OSHA workplace safety requirements,
and instills proper safety practices and procedures for working
in an industrial or construction environment. The proper use of
tools and equipment also will be discussed with an emphasis on
their safe use.
ELTR 1423 - Electrical/Electronic Drafting 2/2 (3)
Students will draw, read, and interpret various types of diagrams
and drawings used to represent electrical and electronic
circuitry. Topics include board-drafting fundamentals; digital
logic diagrams; relay and ladder logic diagrams; wiring diagrams;
residential wiring; schematic symbols and diagrams; and
printed circuit board artwork. Students will work manually on
a drafting table and will engage in computer-aided drafting and
computer simulation of various electrical and electronic circuits.
Emphasis will be placed on developing the student’s ability to
correctly understand and interpret electrical and electronic drawings
and diagrams. All students will complete a project which
involves drafting a proper schematic diagram, creating printed
circuit board artwork, fabricating a printed circuit board, and
assembling a working electronic circuit. Lab assignments require
basic drafting tools.
ELTR 2074 - DC & AC Rotating Machines 2.5/3 (4)
Prerequisite: ELTR 1064. This course will provide the student
with a basic understanding of the operation and characteristics
of various electric generators, alternators, motors, drive-train
components, electronic motor drives, and simple motion control
systems. Students will install and operate various kinds of motors,
testing them for speed, torque, and efficiency. Basic motor-circuit
troubleshooting will be emphasized. This course also explores
pulse-width modulated motor-speed control, stepper motors, and
servo motors and control systems. Motor and generator related
projects may be employed as time permits.
ELTR 2162 - Selected Studies I
(Based on demand) 1.5/1 (2)
Prerequisites: ELTR 1044 or equivalent and consent of instructor.
Students will investigate the characteristics and operation of
individual electronic devices and/or systems. This may include
lasers, fiber optics, phase-locked-loops, active filers, microprocessors,
microcomputer hardware and software, and others. A formal
paper will be required upon completion of this course.
ELTR 2172 - Selected Studies II
(Based on demand) 1.5/1 (2)
Prerequisites: ELTR 2162 and consent of instructor. This course
is a continuation of ELTR 2162 - Selected Studies I.
ELTR 2182 - Special Projects I
(Based on demand) 1.5/1 (2)
Prerequisites: ELTR 1044 or equivalent and consent of instructor.
Students will investigate the characteristics and operation
of electronic devices and/or systems. Students will construct a
personally funded project. The project along with a formal paper
will be required upon completion of this course.
ELTR 2192 - Special Projects II
(Based on demand) 1.5/1 (2)
Prerequisites: ELTR 2182 and consent of instructor. This course
is a continuation of ELTR 2182 - Special Projects I.
ELTR 2302 - Electronics/Electrical Internship
(By student request) 0/10 (2)
Prerequisites: Successful completion of a minimum of 30 credit
hours of ELTR courses and approval of the program coordinator.
Students will apply electronic knowledge in a cooperating business
under the supervision of a training sponsor and the program
coordinator. A work log will be kept, and a summary paper will
be required upon completion of the experience.
ELTR 2314 - Intro to Solar-Thermal Technology 2.5/3 (4)
Prerequisites: ELTR 1223, ELTR1064, and ELTR 1034. This
course explores the use of Solar-Thermal technology for space
heating and water heating. Students will be given theory and
hands-on lab experience, sizing, installing and maintaining solarthermal
heating systems. Basic hand tools must be supplied by the
students. An overall goal of this course is to prepare the student
for the NABCEP Solar-Thermal pre-certification exam.
ELTR 2324 - Intro to Small-Wind Energy Tech 2.5/3 (4)
Prerequisites: ELTR 1223, ELTR 1064, ELTR 1174, ELTR
2074, and ELTR 2414. This course explores the design, installation
and use of Small-Wind Electrical Generator Systems for
consumer and commercial applications. Students will be given
theory and hands-on lab experience, sizing, installing and maintaining
small-wind electrical generating systems. Basic hand
tools must be supplied by the students. An overall goal of this
course is to prepare the student for the NABCEP Small-Wind
pre-certification exam.
ELTR 2334 - Intro to Solar-Photovoltaic Tech 2.5/3 (4)
Prerequisites: ELTR 1223 and ELTR 1064. This course explores
the design, installation and use of Solar-Photovoltaic power systems
for consumer and commercial applications. Students will
be given theory and hands-on lab experience, sizing, installing
and maintaining solar-photovoltaic electrical generating systems.
Basic hand tools must be supplied by the students. An overall
goal of this course is to prepare the student for the NABCEP
solar-photovoltaic pre-certification exam.
ELTR 2414 - Industrial Motor Control 2.5/3 (4)
Prerequisite: ELTR 1064. The purpose and function of AC and
DC motor controls is covered in this course. By using motor
control symbols and line diagrams, students will install and
troubleshoot various industrial control circuits found in a modern
industrial setting. Basic tools must be supplied by the student.
2009-10 catalog • www.kcc.edu
137